Technical Papers

  • Claflin, J K, La Brooy, S R and Preedy, D, 2015. Lessons learnt and performance – installing and commissioning an Ausenco carbon reactivation kiln in Africa, in Proceedings MetPlant 2015, pp 163–174 (The Australasian Institute of Mining and Metallurgy: Melbourne).
  • Wittig, R., 2013. 'Mining and Metals Mega Project Development: Optimising Current Practices and Strategies'. In N. Aziz (Ed.), Coal Operators Conference 2013 (pp. 393-399). Woollongong: University of Woollongong
  • Bohnhoff, G. L., Ogorzalek, A.S., Benson, C. H., Shackelford, C. D., & Apiwantragoon, P., 2009, 'Field Data and Water-Balance Predictions for a Monolithic Cover in a Semiarid Climate', Journal of Geotechnical and Geoenvironmental Engineering, March.
  • Lane G., & Messenger, P., 2005, ‘Commissioning”, Chapter 7 in Advances in Gold Ore Processing’, Ed. M. Adams, Elsevier.
  • Ma, L., & Daemen, J., 2005, 'An experimental study on creep of welded tuff', International Journal of Rock Mechanics & Mining Sciences 43 (pp. 282-291).
  • Johansen, G., English, D., Lane, G., & Hayward, T., 2005, ‘Bendigo Utilises High Pressure Grinding Rolls to Maximise Recovery’, AusIMM Bulletin, March/April.
  • Breitenbach, A., 2004, 'Improvement in Slope Stability Performance of Lined Heap Leach Pads from Design to Operation and Closure', GFR Engineering Solutions, Vol. 22, No. 1, January/February.
  • Morley, C., 2003, ‘A Quantification of the Benefits of High Pressure Rolls Crushing in an Operating Environment’, Minerals Engineering, September
  • Morley, C., 2003, ‘HPGR in hard Rock Applications’, Mining Magazine, September.
  • Barter, J., Lane, G., Mitchell, D., Kelson, R., Dunne, R., Trang, C., & Dreisinger, D., 2001, ‘Cyanide Management by SART’, in Cyanide: Social, Industrial and Economic Aspects, Ed. Young C., Tidwell L and Anderson, C., The Minerals , Metals and Materials Society Annual Meeting, Feb, pp. 549-562.
  • Hoyer, D.I., Mulvihill, B.M., & Young, G.J.C., 2001, ‘Hicom Attritioning to remove Alumina-Silicate Coatings on Ilmenite Sand Grains’, Minerals Engineering, Vol. 14, No. 7, pp 723-731.
  • Zhang, H., Ritchie, .M., & La Brooy, S.R., 2001, ‘Electrochemical oxidation of gold and thiourea in acidic thiourea solutions’, J Electrochemical Society, 148 (2001), pp. D146-D153.
  • Smith, M., & Giroud, J., 2000, 'Influence of the Direction of Ore Placement on the Stability of Ore Heaps on Geomembrane-Lined Pads', Society of Mining, Metallurgy and Exploration, Chapter 49, pp. 435 - 438.
  • Zhang, H.G., Doyle, J. A., Kenna, C.C., La Brooy, S.R., Hefter, G.T., & Ritchie, I. M. 1996, ‘A kinetic and electrochemical study of the cementation of gold onto mild steel from acidic thiourea solutions’, Electrochimica Acta, 41, No. 3, pp. 389-395.
  • Zheng, J., Ritchie, I.M., La Brooy, S.R., & Singh, P., 1995, ‘Study of gold leaching in oxygenated solutions containing cyanide-copper-ammonia using a rotating quartz crystal microbalance’, Hydrometallurgy, 39, pp. 277-292.
  • La Brooy, S.R., Linge, H.G. & Walker, G.S., 1994, ‘Review of gold extraction from ores’, Minerals Engineering, 7, (10), pp. 1213-1241.
  • La Brooy, S.R. & Muir, D.M., 1994, ‘Gold processing with saline water’, The AusIMM Proceedings, 299, (2), pp. 81-88.
  • La Brooy, S.R., Hosking, J.W., Muir, D.M., Ruane, M., Smith, I. & W. Hinchliffe, W.D., 1984. ‘Studies on the fouling and regeneration of C.I.P. carbon’, Gold-Mining, Metallurgy and Geology, AusIMM, Melbourne, pp. 257-269