The system currently includes a 52km, 28-inch diameter, 37.5 million tonne per year (mt/y) ore pipeline and a 52km, 24-inch diameter water pipeline.
Compañia Minera Disputada, now Anglo American Sur, selected Ausenco to perform a full range of services throughout the pipeline system development, from studies through to design work, beginning in 1998.
Original pipeline expansion
In 1988, the Los Bronces system expanded operations to process up to 11.4 mt/y (33,000 tonnes per day) of copper ore. This expansion necessitated the relocation of the concentrator. Ausenco was selected as a specialty sub-contractor to perform the following services during the project:
Following this work, Ausenco was selected to provide an expert consultation to Exxon Production Research for a wear audit. The investigation focused on a high wear condition noted at the beginning of the pipeline and the erosion monitoring system.
Our scope included:
In 2002, Ausenco was retained with joint venture partner JRI to complete basic and detailed engineering for the replacement of the original 20-inch buried copper ore pipeline, which had exceeded its design life. The pipeline was incrementally replaced with a new 24-inch diameter pipe, increasing throughput to 18.7 mt/y (54,000 tpd).
Our scope of work in this phase of the project included:
Ausenco also performed an inspection of several choke station spool failures, as there was some concern about the viability of the existing choke stations with the higher flows of the new pipeline.
The audit included recommendations to improve lining techniques and quality control, as well as process changes.
In 2005, Ausenco performed a conceptual study to evaluate the new system with the replacement pipeline.
Our scope of work included:
In 2008, the system was expanded again to allow processing of 37.5 mt/y. Ausenco offered design and support services for the expansion, including:
Our control systems group was also contracted to provide Ausenco’s Pipeline Advisor™ leak detection and process optimisation system as well.
This phase was completed in late 2011.
By understanding the key slurry properties in the laboratory, we are able to more accurately understand how the slurry will behave under the expected plant conditionsRead Article
In this Insight, we have connected with Paul Staples, VP and Global Practice Lead, M&M, to discuss his take on Ausenco’s project delivery capabilities and differentiatorsRead Article